BS EN 10021-2006 General technical delivery requirements for steel products
|
ID： |
28E8CB0FB70C46448936EA3DDC8E15B5 |
|
文件大小(MB)： |
0.45 |
|
页数： |
20 |
|
文件格式： |
|
|
日期： |
2009-1-19 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10021:2006,General technical,delivery conditions for,steel products,The European Standard EN 10021:2006 has the status of a,British Standard,ICS 77.140.01, , , ,Licensed Copy: Nanyang Tech University Library, , Fri Jan 11 10:03:48 GMT+00:00 2008, Uncontrolled Copy, (c) BSI,BS EN 10021:2006,This British Standard was,published under the authority,of the Standards Policy and,Strategy Committee,on 31 May 2007,. BSI 2007,ISBN 978 0 580 50077 0,National foreword,This British Standard was published by BSI. It is the UK implementation of,EN 10021:2006. It supersedes BS EN 10021:1993 which is withdrawn.,The UK participation in its preparation was entrusted to Technical Committee,ISE/5, Technical delivery conditions, classification and designation of steels.,A list of organizations represented on ISE/5 can be obtained on request to its,secretary.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard cannot confer immunity from,legal obligations.,Amendments issued since publication,Amd. No. Date Comments,Licensed Copy: Nanyang Tech University Library, , Fri Jan 11 10:03:48 GMT+00:00 2008, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10021,December 2006,ICS 77.140.01 Supersedes EN 10021:1993,English Version,General technical delivery conditions for steel products,Conditions générales techniques de livraison des produits,en acier,Allgemeine technische Lieferbedingungen für,Stahlerzeugnisse,This European Standard was approved by CEN on 25 November 2006.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2006 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 10021:2006: E,Licensed Copy: Nanyang Tech University Library, , Fri Jan 11 10:03:48 GMT+00:00 2008, Uncontrolled Copy, (c) BSI,EN 10021:2006 (E),2,Contents,Page,Foreword3,1 Scope .4,2 Normative references ..4,3 Terms and definitions .4,4 Information to be supplied by the purchaser 6,5 Manufacturing process ..6,6 Supply by an intermediary6,7 Requirements 7,7.1 General..7,7.2 Chemical composition 7,7.3 Mechanical properties.7,7.4 Surface and internal quality.7,7.4.1 General..7,7.4.2 Detection of discontinuities.7,7.4.3 Removal of discontinuities 7,7.4.4 Repairs by welding 8,8 Inspection 8,8.1 Type of inspection documents and type of inspection ..8,8.2 Non-specific inspection .8,8.3 Specific inspection 8,8.3.1 General..8,8.3.2 Testing frequency..9,8.3.3 Sampling conditions and test pieces .9,8.3.4 Test procedures 10,8.4 Invalidation of test results ..11,8.5 Rounding of results of mechanical and chemical tests ..11,9 Sorting and reprocessing 11,10 Marking ..12,11 Disputes.12,Bibliography .17,Licensed Copy: Nanyang Tech University Library, , Fri Jan 11 10:03:48 GMT+00:00 2008, Uncontrolled Copy, (c) BSI,EN 10021:2006 (E),3,Foreword,This document (EN 10021:2006) has been prepared by Technical Committee ECISS/TC 9 “Technical conditions of,delivery and quality control”, the secretariat of which is held by IBN/BIN.,This European Standard shall be given the status of a national standard, either by publication of an identical text or,by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by,June 2007.,According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following,countries are boun……
……